필자
Noah's test for a guide is whether someone can do the thing afterwards. A trick explained is not a trick taught, and most tutorials give up at the word just — just flick it, just commit, just land it. He would rather name the boring fundamental everyone skips than write another list of tips, and he thinks nobody should feel stupid for asking what width to start on.
기사 11편
Graphic tape sounds like a trade-off between looks and feel. Here is what Zeg Heads and Slushcult actually say about this four-pack, and how to pick between the 1mm and 0.5mm sheets.
A shop in r/Fingerboards is a year into a park build and about to commit to a finish. Here is how to pick a coating that keeps the ride surfaces fast, the ledges grindable and the whole thing repairable.
Triple Shell and Caramel Fingerboards have put out a handmade concrete kicker on a 3D-printed base. Here is how to read its three numbers, and what the listing does and doesn't tell you.
Chris Daniels traces fingerboarding back to toy boards in sinks. Here is what his video actually claims, how to read an origin story like that, and what household terrain still explains about the obstacles we build now.
Caramel pairs a five-ply handmade deck from Argentina with its own Chrome C4 trucks and 7mm wheels, boxed with spares and a tool. Here's what the listing confirms, what it leaves open, and the width you need to check first.
A dual-bearing fingerboard wheel carries a bearing in each side, like a skateboard wheel, and it won't go on a standard axle. What the design changes, which trucks fit, what it does to your setup's width, and what the makers haven't published.
A post in r/Fingerboards asked whether deep pockets come from wheel flares, a short transition or a negative value. Mold F.O.R.G.E.'s own docs and code point to three other settings.
MintFB spent two weeks riding a plastic fingerboard. Here's what a plastic board can and can't teach you, part by part, and when it's worth putting money into wood, tape, bushings and urethane.
A bench routine for working out which part is actually out of true — deck, baseplate, holes, hardware or hanger — plus Mike Schneider's demonstration of straightening bent fingerboard trucks.
A new video from cdplaya lays out why local meetups are so hard to track down. Here's a practical method for finding riders near you, plus what it takes to host the first small session yourself.
cdplaya's new 22-minute tutorial argues that beginners stall because they learn moves in isolation instead of mechanics. Here's how to turn that premise into a session plan you can actually run.
